Subject: problem compiling on solaris machine
From: James V. S. Watson (jvw3n@virginia.edu)
Date: Mon Apr 15 2002 - 19:37:24 PDT
I tried installing the Vortex and Cecil code on a machine here, but I'm
running into problems. I'm using the solaris code that you supply
because:
> : /af5/jvw3n/temp/Vortex/bin/solaris ; uname -r
> 5.8
I change the required values so that all of the correct executables are
found, but I'm running into some errors and I'm not sure how to correct
them.
I realize this isn't a lot of information that I'm giving you, but I'm
not sure what else you need to know.
The errors that I am getting are at the bottom of this e-mail.
Thanks for any help that you can give me.
-James
---------------------------------------------------------------------
: /af5/jvw3n/temp/Vortex ; csh -f /home/jvw3n/temp/Vortex/bin/shell/SETUP
SETTING UP VORTEX DISTRIBUTION IN /home/jvw3n/temp/Vortex
FOR ARCHITECTURE solaris
=== Setting up Common components of Vortex distribution ===
- Creating any needed script wrappers for solaris -
- Building tools -
- Building conservative GC -
../solaris/setjmp_test
This appears to be a SPARC running SUNOS5
Stack appears to grow down, which is the default.
A good guess for STACKBOTTOM on this machine is 0xFFBF0000.
Note that this may vary between machines of ostensibly
the same architecture (e.g. Sun 3/50s and 3/80s).
On many machines the value is not fixed.
A good guess for ALIGNMENT on this machine is 4.
Generic mark_regs code may work
../solaris/gctest
STACK_GROWS_DOWN is defd, but stack appears to grow up
sp = 0xffbef2cc, GC_stackbottom = 0x0
stack direction 3
gmake: *** [KandRtest] Abort
------ compilation failed ------
??? Common components of Vortex distrubution NOT set up
??? Please correct the problems and run SETUP again
_______________________________________________
Cecil mailing list
Cecil@cs.washington.edu
http://majordomo.cs.washington.edu/mailman/listinfo/cecil
This archive was generated by hypermail 2b25 : Mon Apr 15 2002 - 19:38:10 PDT